QD Style Bushings Type SF - To be used with QD Sprockets or Pulleys; Quantity Discounts Size:SF-9/16" #60-02-0012

#60-02-0012

Average Tensile Strength: 48

35B72H Type B Sprocket

1 3/8" UCHA-207-22

1/2" Diameter

QD Style Bushings Type SF - To be used with QD Sprockets or Pulleys; Quantity Discounts Size:SF-9/16" #60-02-0012QD BUSHINGS TYPE SF Choose your bore size above. To be used with QD Sprockets or Pulleys QD Bushings are precision machined tapered and fully split on one side. The taper bored QD Sprocket or Pulley easily fits over the tapered bushing, and tightening of the cap screws produces a tight press fit on the shaft. The sprocket is easily removed from the bushing by using the pull up bolts as jackscrews in the holes tapped in the rim of the sprocket.